Home  >  INTRUSION  > (x)
|◀ ◀ 85 - 96 of 3924 ▶ ▶|
View:

SW SET, SPST-NO 1" GAP RMINAL

Item#:
20RS-TXWG-W
You must be logged in to order this item. Log in here

SW SET, SURF MNT PULL APART " ARMORED CBL SPDT 10/17AT

Item#:
4704-A
You must be logged in to order this item. Log in here

Replacement Battery Pack

The console battery pack can be purchased separately for use with a GC2 Panel to extend battery life or to use as a replacement battery.

Features:

  • Optional extra capacity battery
  • Replaces standard internal Control Panel battery
  • Required for UL985 fire warning system listing
  • Nickel metal hydride (NiMH) battery

Item#:
2GIG-BATT2X
You must be logged in to order this item. Log in here

StarLink 30' Extended Remote Antenna Kit

Extended Remote Antenna Kit for use with cellular fire communicators, suitable for outdoor or indoor applications. Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 30' LMR 300 Coax Type N male to SMA male terminated cable, one (1) SMA female to TNC male adapter for use with competitive communicators. Also includes SLE-ANTEXT-ISO Commercial Fire Ground Fault Isolation Plate.
Item#:
SLE-ANTEXT30
You must be logged in to order this item. Log in here

SW SET, MOLDED 80 CASE SPST-NO W/MM-9RS-G 1/2"+ GAP

Item#:
120T-12-G
You must be logged in to order this item. Log in here

Combination Mini Switch & Magnet with Terminal Screw or Stick - White

Item#:
QPC100TWC
You must be logged in to order this item. Log in here

Low Temperature Range Sensor   Stainless Steel (Blue)

  • Sensor Diameter .3 in. (7.62 mm)
  • Cable Lead 38 in. (.96 m) [extend up to 1,000 ft.
  • (305 m) using 22 AWG twisted pair] -58 to 158°F (-50 to 70°C)

Item#:
TEMP-L-S
You must be logged in to order this item. Log in here

Firmware Update Cable for GC2 & TS1

Features:

  • Quickly and easily update the GC2 or TS1 without incurring the OTA update charges from a remote services provider
  • Connect a PC directly to a GC2 or TS1 using the Firmware Update Cable to update them to the latest firmware
  • 4-pin TS1 adapter included

Item#:
2GIG-UPCBL2
You must be logged in to order this item. Log in here

Switch Only, 3/8" Press with Terminal - White

Item#:
QPCS38TW
You must be logged in to order this item. Log in here

SW SET, SURFACE MOUNT WHT -NO 1" GAP GRI LOGO

Item#:
29A-W
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

SMP3E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5A continuous supply current. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.
  • Power supply/charger with enclosure.
  • Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries.

Specifications:
Input:
  • 6VDC or 12VDC output use TP1640 or 24VDC output use T2428100.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3E
You must be logged in to order this item. Log in here

Combination Mini Switch & Magnet, 12 in. Lead Stick - White

Item#:
QPC110WC
You must be logged in to order this item. Log in here
|◀ ◀ 85 - 96 of 3924 ▶ ▶|
View:
(Denotes required field.)