S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
The way that the Qolsys IQ Hardwire 16-F works is very simple. It has 16 on-board zone terminal pairs for connecting hardwired sensors. Each zone features its own LED light to assist with enrollment and troubleshooting. A resistor must be used at each zone. In Legacy Mode, the QS7134-840 can be calibrated to use 1k to 10k resistors that are wired in parallel (NO) or series (NC). This differs from the older-style QS7133-840 that was restricted to only supporting 4.7k resistors (Yellow-Violet-Black-Brown-Brown). However, all versions of the Qolsys IQ Hardwire 16-F come with the same 4.7k resistors that must be used to meet UL Standards for fire protection. These resistors work great, so it is advised that you just use the included ones to avoid any possible confusion.
For primary power, the Qolsys IQ Hardwire 16-F uses its included 16VDC transformer. This transformer features an attached power cable for connecting with the module. On the cable, the wire with the grey dashes is the positive (+) connector. The unmarked wire represents the negative (-) connector. If you damage the transformer or the attached cable, then you will need to get a replacement 16VDC transformer.
- 30 Watt Horn Speaker
- Attached Mounting Bracket
- High Fidelity Voice Coil
- Pre-Wired For Easy Installation
- Ideal for Alarm Systems or Paging
- Interior or Exterior use
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 30 Watts Nominal
- Frequency Response: 500 to 7000 Hz
- Size: 6 x 8 x 9.5 inches
- Color: White
- Transmits power at the full FCC limits, maximizing range
- Support for an external contact
- 1-inch magnet gap
- cover tamper
- 6+ year battery life
The PG9949 Wireless PowerG 2-Button Key combines easy management of the security system with the added confidence of personal portable protection. The modern, compact key lets users easily arm/disarm the system as they approach the building or call for help in the event of a danger when in close proximity to or inside the building.
The PG9949 Wireless PowerG 2-Button Key provides both visual and audible verification of the successful execution of any requested commands. The dual confirmation that the message has been executed by the security system offers peace of mind to users.
The PG9949 is equipped with a full two-second activation delay on its panic function to help reduce false alarms, thus minimizing costly false dispatches caused by accidental activations. Additionally, the other keys incorporate a one-second delay to minimize false activations.
Features:
- Activation via 2 large, easy to use buttons
- Integrated LED to indicate signal transmission and acknowledgement
- Built-in buzzer for audible indication
- Water resistant
- Multifunction clip and neck strap
- Full 2-second delay on panic button
- Safety Mechanism for preventing false panic calls
- Prolonged battery life (7 years with typical use)
- Supplied with a belt clip, a key chain, and a lanyard necklace
- Dimensions: 53 x 33 x 11mm (2.1 x 1.3 x 0.43in)
- For sensing things that open or separate
- Magnet and Internal reed switch
- 1 supplemental hardwire zone
- Outer terminal
- Cover tamper
- Strong, reliable RF signal
- 10-15 year battery life on CR123A battery
- Low Battery indication
- Secure, 4-10-digit code to disarm
- 1-button arming
- Mounts on wall via VHB tape
- Option to use as primary or backup-keypad device
- LED indicator
- Reversible backplate for wall or table top mounting
- 360° detection range with 62 distinct detection zones
- Range up to 40 feet in diameter
- Selectable pulse count 2 or 4
- Designed for commercial applications
- 5-year warranty