Home  >  INTRUSION  > (x)
|◀ ◀ 4369 - 4380 of 4408 ▶ ▶|
View:

Power Transformer, 120VAC Primary 12 VAC, 25VA; 24 VAC, 50VA

Edwards 88 Series Transformers provide low voltage source from 50 to 250 volt amps for all large signaling installations. Holes provided in transformer housing for surface mounting.The Edwards 88 Series heavy duty transformers are for heavy duty industrial and commercial applications.

Features:

  • Enclosed connections
  • Primary Pigtails
  • Screw terminal connections on secondary

Item#:
88-50
You must be logged in to order this item. Log in here

Interior 20 Watt Echo Speaker

The ELK-70 is a 20 Watt, 8 Ohm Speaker mounted in an attractive surface mount plastic enclosure. This versatile Echo Series speaker is designed to be heard but not seen. Sound "echoes" off mounting surface from back plate edge.
This unique contemporary speaker has a smooth, paintable, "no grill" surface that easily blends with any decor. This speaker mounts to any flat surface or single gang electrical "J" box. Also available is the ELK-73, a compact version of the ELK-70.
Includes:

  • Echo Speaker
  • (4) Plastic Anchors
  • (4) #6 pan head sheet metal screws
Features:
  • Pre-Wired for easy Installation
  • May be Painted or Wallpapered
  • Mounting Hardware Included
  • Lifetime Limited Warranty
Specifications:
  • Impedance: 8 Ohms
  • Rating: 20 Watts Nominal
  • Frequency Response: 500 to 7000 Hz
  • Size: 4.375 H x 6.375 W x 1.875 inch D
Item#:
70
You must be logged in to order this item. Log in here

Narrow, 1-60 Sec. PTD, SPDT Fo rm Z

Item#:
6805
You must be logged in to order this item. Log in here

GEM-P801, RP8, XFMR,SIREN BT

Item#:
801SUPERSVRPK-3
You must be logged in to order this item. Log in here

Wireless Slim-line Door/Window Sensor, Two-Way for M1XRFTW Transceiver

This slim wireless door & window sensor is ideal for door and window applications and features Elk's industry leading two-way technology.
Includes:

  • Slimline Door/Window Wireless Sensor
  • Magnet
  • Replaceable 3.6V Lithium battery
  • Tamper Switch
  • 4 #4 x ½" Flat Head Sheet Metal Screws
  • Double Sided Tape for both transmitter and magnet
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
  • One built-in reed switch
  • Front and back tamper option
Specifications:
  • 902 Mhz - 928 Mhz frequency hopping
  • Maximum operating gap of reed: 1/2"
  • 3.6V ER14250 lithium battery
  • Battery Life: 7 years typical
  • Size: .71 in W x 3.4 in. L x .8 in. D, Magnet: .57 in. W x 1.5 in. L x .6 in. D

Item#:
6020
You must be logged in to order this item. Log in here

SPEAKER,70V,WHITE te

Item#:
757-1A-S70W
You must be logged in to order this item. Log in here

Relay Module SPDT 12 VDC, Big Terminals

The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form "C" contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.
Includes:

  • (1) ELK-912B Relay
  • 2 pieces of Double Sided Mounting Tape
  • Instructions
Features:
  • High Quality Cross-head Terminals
  • 12 or 24 Vdc Selectable Operation
  • Low Current Draw
  • Voltage Input LED
  • Form "C" Dry Contacts
  • Great For General Purpose Switching
  • Small, Compact Size
  • Double Sided Foam Tape Provided For Mounting
  • Packaged in Reusable Poly Storage Box
  • Lifetime Limited Warranty
Specifications:
  • Operating Voltage: 12 or 24 Volts DC Nominal
  • Current Draw: 35mA, triggered (relay on)
  • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
  • Min. Pull-in Voltage: 9VDC on 12V setting, 19VDC on 24V setting
  • Size: 2 in. X 1.5 in. (51mm X 38mm) Ea
Item#:
912B
You must be logged in to order this item. Log in here

2-Way Wireless Outdoor PIR Motion Sensor

The ELK-6032 All Environment PIR Motion Sensor combines the Optex VXI-R battery operated PIR detector with ELK’s advanced Two-Way Wireless technology for M1 Controls. 
When the PIR sensor detects a violation, the two-way radio transmitter will transmit that event to the ELK Two-Way Wireless transceiver. Each signal sent from the sensor is acknowledged by the transceiver. This is to ensure that all messages are delivered, and it helps make the sensor energy efficient by not having to waste energy repeating any transmissions unless they have not been acknowledged.
The 6032 includes a battery saver timer designed to extend the life of the battery. This timer can be set for 5 sec. or 120 sec. Upon an initial violation, the sensor will activate the transmitter and start the timer. No additional activations will be detected or transmitted while this timer is running.
  • Delivers stable and dependable detection even in severe outdoor environments
  • Dual PIR Detection
  • Adjustable Sensitivity and Range
  • Adjustable Battery Saver Timer
  • Two-Way wireless communicatons for reliable operation and extended battery life
  • Transmits tamper and low battery troubles
  • Coverage: Up to 12m (40ft.) by 90° with flexible detection pattern adjustable to 5 range settings
  • IP Code: IP55
  • Frequency: 902 - 928 Mhz channel hopping 
  • Power Input: 3.0 VDC
  • Operating Voltage: 2.5 to 10 VDC
  • Battery Type & Size: 2 x Lithium CR123A (supplied)
  • Standby (Quiescent) Current Draw including sensor: ~12μA
  • Current Draw: Max. ~6mA (Walktest, LED on, Transmitting)
  • Operating Temperature Range: -4 to 140°F (-20 to 60°C)
Item#:
6032
You must be logged in to order this item. Log in here

SPEAKER,RE-ENTRANT,70V,WHITE ite

Item#:
757-1A-R70W
You must be logged in to order this item. Log in here

Double Side Foam Tape; Assorted Thicknesses 156 pcs

Double Sided Mounting Tape with an aggressive pressure sensitive permanent adhesive on both sides. Package contains an assortment of three (3) thicknesses; 1/16", 1/8", and 1/4". This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular surfaces.
  • Aggressive Permanent Adhesive
  • Closed Cell Foam
  • Flexible, Conforms To Irregular Surfaces
  • Hundreds Of Uses And Applications
  • Ideal For Mounting Circuit Boards
  • Assortment of Thicknesses
  • Handy Reusable Poly Storage Box
  • 156 Pre-cut Pieces
  • Individual Piece Size: 1/2" x 1-1/2"
  • Thickness (52 pieces of each): 1/16", 1/8", 1/4"
Item#:
999A
You must be logged in to order this item. Log in here

Relay; Sensitive 1 mA trigger, DPDT, 12/24V, (4 pack)

The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp. 
  • Super Low 1.2 mA Trigger Current
  • Positive (+) Or Negative (-) Trigger Input
  • Double Form "C" Contacts DPDT
  • Heavy Duty Contact Rating
  • On Board LED Status Indicator
  • Includes Double Sided Mounting Tape
  • Mounts in Standard 2.75" Snap Track
  • Packaged in Reusable Poly Storage Box
  • Operating Voltage: 12 or 24 Volts DC, jumper selectable
  • Current Draw: 60mA (both relays on)
  • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
  • Size: 1.5" X 2.75"
  • Trigger Voltage: 5 - 24VDC
  • Trigger Current: 1.2mA @12 VDC
Item#:
9244
You must be logged in to order this item. Log in here

Wireless Single Button Remote, Two-Way for M1XRFTW Tranceiver

The ELK-6011 Single Button Panic Sensor has a stylish new look and now has a replaceable battery! It features a Single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm.
Includes:

  • ELK-6011 Panic Button
  • 3V Lithium Coin Cell Battery
  • 30 inch Clear Plastic Lanyard
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
  • Single press and hold button and red LED feedback indicator
  • Water resistant lanyard included
Specifications:
  • 902 Mhz - 928 Mhz frequency hopping
  • Size: 1.50 in. W x 2.32 in. L x .50 in. D
  • Battery: CR2032 Lithium Coin Cell

Item#:
6011
You must be logged in to order this item. Log in here
|◀ ◀ 4369 - 4380 of 4408 ▶ ▶|
View:
(Denotes required field.)