S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Pet Immunity up to 40lbs
- Ease of installation with keypad initiated walk test
- Industry First Security/Convenience Bright White LED with:
- Momentary motion activation during walk test mode
- Flashing during audible alarm activation
- Programmable “on” activation through M1 Rules
- Illuminate an area for camera assistance during event
- Temporary night path lighting
- Long battery life and 2 selectable sleep mode durations
- Selectable coverage range, up to 40 ft x 40 ft
- Adjustable pulse count helps eliminate false trips
- High quality dual element Pyroelectric sensor
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Pre-Wired Terminal Lugs for easy Installation.
- 110 VAC Plug Cord for Energizing the Relay Coil
- Heavy Duty "Lockable" Metal Enclosure
- 30 Amp Long Life Double Pole Relay Contacts.
- Relay Suitable for a 110 VAC or 220 VAC Load
- Ideal for Water Heaters, Motors, Pumps, etc.
- Operating Coil Voltage: 110 VAC
- Coil Current Draw: less than 35 mA
- Contacts Rated for: 30 Amps AC maximum
- Metal Enclosure Size: 12" x 12" x 3.375" * Not suitable for wet locations.
- Color: White
The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control.
The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology. The factory set recognition patterns make it possible to detect the difference between breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Includes:
- Wireless Glass Break Sensor
- Replaceable 3V Lithium battery
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Instructions
- Pattern Recognition Technology
- Wireless two-way communication
- Operation Alarm LED - RED (viewable from front)
- RF Acknowledge LED - Bi-Color (viewable with cover off)
- Long life Lithium battery {supplied}
- Low battery trouble signal
- Dimensions: 4.25in. W x 3.13in. H x 1.70in. D
- Sensor: Omni-directional Microphone, 360° Detection Range
- Detection Range: 20 ft. (6m) x 360°
- Min. Distance from Glass: 4 ft. (1.2m)
- Glass Thickness:
- Plate 3/32 to 1/4 in. (2.4 to 6.4mm)
- Tempered 1/8 to 1/4 in. (3.2 to 6.4mm)
- Wired 1/4 in. (6.4mm)
- Laminated 1/8 to 1/4 in. (3.2 to 6.4mm)
- Power: One CR123 3.0 VDC Lithium Bttery
- Typical Battery Life: 5 years
The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply.
In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:
- 20 Low Battery Cutoff & Master Power Switches
- 40 pieces of Double Sided Tape
- Instructions
- Works With Any 12 Volt Control Panel
- Automatic Low Battery Cutoff Protects Battery From Deep Discharge
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Lifetime Limited Warranty
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
- Four programmable function keys
- Built-in sounder
- Seven Status LEDs
- Armed (Red)
- Ready (Green)
- Power (Green)
- Fire Alarm (Red)
- Silenced (Yellow)
- Supervisory (Yellow)
- Trouble (Yellow)
- Large easy-to-read display
- Red removable door
- Physical 5.250" W x 7.437" H x 1.312" D
Works with the M1 control along with the ELK-M1XRFTW Two-Way Wireless Transceiver. Intended to be used in residential and light commercial installations, the PIR incorporates advanced features designed to ensure reliability, ease of installation, and provide innovative security enhancements.
To simplify installation, ELK's Wireless PIR Motion Sensor allows the installer to remotely enable/disable Walk Test Mode from a keypad. Until now, the industry has accepted the process of manually tripping a switch on a one-way wireless PIR to enter walk test mode. The bright high-intensity white LED convenience/security light clearly identifies when the sensor is detecting motion.
Includes:
- Wireless PIR Sensor
- 2 Replaceable 3V Lithium battery
- Standard Swivel Bracket and Locking Disc
- Blanking Plug
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Plastite #3 x ¼ in. screw
- #4 x 3/8 in. Pan Head Sheet Metal screw
- Instructions
- Ease of installation with keypad initiated walk test
- Industry First Security/Convenience Bright White LED with:
- Momentary motion activation during walk test mode
- Flashing during audible alarm activation
- Programmable "on" activation through M1 Rules
- Illuminate an area for camera assistance during event
- Temporary night path lighting
- Long battery life and 2 selectable sleep mode durations
S2K Administration - Form Template Display
Actions