Home  >  INTRUSION  > (x)
|◀ 3877 - 3888 of 3913 ▶|
View:
Double Sided Mounting Tape with an aggressive pressure sensitive permanent adhesive on both sides. Package contains an assortment of three (3) thicknesses; 1/16", 1/8", and 1/4". This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular surfaces.
  • Aggressive Permanent Adhesive
  • Closed Cell Foam
  • Flexible, Conforms To Irregular Surfaces
  • Hundreds Of Uses And Applications
  • Ideal For Mounting Circuit Boards
  • Assortment of Thicknesses
  • Handy Reusable Poly Storage Box
  • 156 Pre-cut Pieces
  • Individual Piece Size: 1/2" x 1-1/2"
  • Thickness (52 pieces of each): 1/16", 1/8", 1/4"
Item#:
999A
You must be logged in to order this item. Log in here
The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp. 
  • Super Low 1.2 mA Trigger Current
  • Positive (+) Or Negative (-) Trigger Input
  • Double Form "C" Contacts DPDT
  • Heavy Duty Contact Rating
  • On Board LED Status Indicator
  • Includes Double Sided Mounting Tape
  • Mounts in Standard 2.75" Snap Track
  • Packaged in Reusable Poly Storage Box
  • Operating Voltage: 12 or 24 Volts DC, jumper selectable
  • Current Draw: 60mA (both relays on)
  • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
  • Size: 1.5" X 2.75"
  • Trigger Voltage: 5 - 24VDC
  • Trigger Current: 1.2mA @12 VDC
Item#:
9244
You must be logged in to order this item. Log in here

The ELK-6011 Single Button Panic Sensor has a stylish new look and now has a replaceable battery! It features a Single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm.
Includes:

  • ELK-6011 Panic Button
  • 3V Lithium Coin Cell Battery
  • 30 inch Clear Plastic Lanyard
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
  • Single press and hold button and red LED feedback indicator
  • Water resistant lanyard included
Specifications:
  • 902 Mhz - 928 Mhz frequency hopping
  • Size: 1.50 in. W x 2.32 in. L x .50 in. D
  • Battery: CR2032 Lithium Coin Cell

Item#:
6011
You must be logged in to order this item. Log in here

Camera, Ip 2.0 Mp Camera, E3 E c/En

This item has been discontinued and replaced by item 
Item#:
720-100128
You must be logged in to order this item. Log in here
The ELK-6051 combines a proven, high reliability electro-chemical carbon monoxide sensor with ELK’s Two-Way Wireless technology for M1 Controls. The sensor has a 10-year life and the unit operates from 2 AAA batteries. 
AudioLINK diagnostic app provides event data from sensor.
  • Proven, high-reliability, electro-chemical carbon monoxide sensor with 10-year life
  • Easy to understand LED indicators provide clear visual indication of alarms, faults, power and RF acknowledgment
  • Diagnostic smartphone app simplifies field testing
  • Individual units provides visual & audible alarm
  • Communicates to M1, activating hardwired sounders & alert to Central Station
Item#:
6051
You must be logged in to order this item. Log in here

This wireless keychain remote (FOB) provides 4 push buttons, LED feedback indicator and features Elk's industry leading two-way technology. From the remote it is possible to arm, disarm, check status, and trigger a panic alarm.
Includes:

  • ELK-6010 Keyfob
  • Replaceable 3V Lithium Coin Cell Battery (CR2032)
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
  • Status inquiry button & LED indicator provide arm, disarm, and alarm memory status
Specifications:
  • 902 Mhz - 928 Mhz frequency hopping
  • Dimensions: 1.50 in. W x 2.32 in. L x .50 in. D
  • Battery: CR2032 Lithium Coin Cell
Item#:
6010
You must be logged in to order this item. Log in here

The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4in. drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk's Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life.

Includes:
  • Wireless Recessed Door Sensor
  • Magnet
  • Replaceable 3.6V Lithium battery
  • 2 #4 x .5 in. Flat Head Sheet Metal Screws
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceiver
  • Designed for wood and vinyl doors only
  • Built-in tamper switch
Specifications:
  • Frequency: 902 Mhz - 928 Mhz frequency hopping
  • Dimensions: .75in. D x 2.5in. L Mag: .75in. D x .625in. L
  • Maximum Operating Gap: 3/4 in.
  • Battery: 3.6V Lithium 1/2 AA size
  • Tamper Switch: Circuit Board Cover

Item#:
6023
You must be logged in to order this item. Log in here

GEM-P816 control, GEM-RP3DGTL digital keypad and transformer

GEM-P816 Features:

  • 8 Hybrid zones on-board (hardwire or wireless), including 2 2-wire fire zones
  • Up to 16 EOL zones with multiplexing (zones from RP1CAe2 alpha keypads or multiplex expansion modules)
  • Uses low-cost GEM-EZM4/8 or 8-zone GEM-EZM8 expansion modules
  • Up to 16 users
  • Supports choice of up to 7 Gemini keypads
  • 256 event logging
  • 3 outputs
  • Interior bypass group
  • Choice of Gemini RF receivers
  • Event log with open/close suppression
  • Supports GEM-EVA Voice Annunciator and WizardIIe Talking Phone-In Interface Module
  • Includes transformer


GEM-RP3DGTL Features:
  • Vivid dual 7-segment digital display keypad
  • EZ-Programming mode
  • New intuitive, stay & away ease-of-use buttons, for easy one button arm and easy "instant" (hold-down) with the GEMK2AS
  • Traditional interior and instant keys with the GEMRP2ASe2
  • Large soft touch backlit keys with tone
  • Backlit displays for easy reading
  • Wireless transmitter signal strength indication
  • Decor friendly soft white design
  • Fire, police and auxiliary programmable panic keys
Item#:
816PERFPAK
You must be logged in to order this item. Log in here

Wireless Smoke Detector, 2-Way w/Sounder and RR Heat

This item has been discontinued and replaced by item 
The ELK-6050 Wireless Smoke Detector is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control. It is intended for residential applications and incorporates many features designed to ensure its reliable performance.

This smoke detector is provides a two-way solution with built-in sounder and wireless Sound Allactivation during an alarm. The unit utilizes photoelectric smoke detection technology, and also includes fixed temperature 135°F heat detection and rapid "rate-of-rise" temperature detection. Built-in self-diagnostics monitors sensitivity and operation status.
Includes:

  • Sound All Smoke Detector
  • (2) Replaceable 3V Lithium battery
  • (2) Plastic Anchors
  • (2) #6 Pan Head Sheet Metal Screws
  • Instructions
Features:
  • Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
  • Ability to activate built-in sounder of all enrolled ELK-6050 smoke detectors
  • Photoelectric Smoke Detection
  • Rapid "rate-of-rise" temperature detection
  • Fixed temperature(135° F) heat detection
  • Size: 5.6" W x 2.4" H


Item#:
6050
You must be logged in to order this item. Log in here

GEM-P801, GEM-K800 Stay/Away Keypad, Transformer, Wall Mount Siren, PIR1680PT, 12V 4AH BATT, RJ31 J&C

Gemini P801 Features:

  • 9 Programmable zones: 6 Hardwire or wireless zones plus 2 wireless zones plus 2-wire fire zone
  • Use 2 optional zones at GEMRP8LCD custom alpha keypad
  • Uses GEMRECVXP8 wireless receiver
  • 8 Individually reporting user codes
  • 50 Event log
  • Line and bell-cut supervision
  • Double reporting & backup reporting
  • EZ wire full-size terminal strips
GEM-K800 Features:
    PIR1680PT
    • 45' x 45' range
    • 20 lb pet/animal Immunity
    • Room-temp alert  temperature monitoring provides auto-alert at 40*F - 90* F
    • Look-down/creep zone
    • D.C.I.D. Technology - detect & compare imaging diagnostics for advanced false and true alarm detection
    • Active self test mode
    • Exceptional RFI-/EMI/lightning shielding of key components
    • Lens bank available, including long range, barrier, and specialty ranges
    • Wall or corner mountable
    • Tamper supervised
    • Form A relay

Item#:
801KSUPERSAVER
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 3877 - 3888 of 3913 ▶|
View:
(Denotes required field.)