S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form "C" contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.
Includes:
- (1) ELK-912B Relay
- 2 pieces of Double Sided Mounting Tape
- Instructions
- High Quality Cross-head Terminals
- 12 or 24 Vdc Selectable Operation
- Low Current Draw
- Voltage Input LED
- Form "C" Dry Contacts
- Great For General Purpose Switching
- Small, Compact Size
- Double Sided Foam Tape Provided For Mounting
- Packaged in Reusable Poly Storage Box
- Lifetime Limited Warranty
- Operating Voltage: 12 or 24 Volts DC Nominal
- Current Draw: 35mA, triggered (relay on)
- Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
- Min. Pull-in Voltage: 9VDC on 12V setting, 19VDC on 24V setting
- Size: 2 in. X 1.5 in. (51mm X 38mm) Ea
Item#:
912B
You must be logged in to order this item.
Log in here
The ELK-6032 All Environment PIR Motion Sensor combines the Optex VXI-R battery operated PIR detector with ELK’s advanced Two-Way Wireless technology for M1 Controls.
When the PIR sensor detects a violation, the two-way radio transmitter will transmit that event to the ELK Two-Way Wireless transceiver. Each signal sent from the sensor is acknowledged by the transceiver. This is to ensure that all messages are delivered, and it helps make the sensor energy efficient by not having to waste energy repeating any transmissions unless they have not been acknowledged.
The 6032 includes a battery saver timer designed to extend the life of the battery. This timer can be set for 5 sec. or 120 sec. Upon an initial violation, the sensor will activate the transmitter and start the timer. No additional activations will be detected or transmitted while this timer is running.
- Delivers stable and dependable detection even in severe outdoor environments
- Dual PIR Detection
- Adjustable Sensitivity and Range
- Adjustable Battery Saver Timer
- Two-Way wireless communicatons for reliable operation and extended battery life
- Transmits tamper and low battery troubles
- Coverage: Up to 12m (40ft.) by 90° with flexible detection pattern adjustable to 5 range settings
- IP Code: IP55
- Frequency: 902 - 928 Mhz channel hopping
- Power Input: 3.0 VDC
- Operating Voltage: 2.5 to 10 VDC
- Battery Type & Size: 2 x Lithium CR123A (supplied)
- Standby (Quiescent) Current Draw including sensor: ~12μA
- Current Draw: Max. ~6mA (Walktest, LED on, Transmitting)
- Operating Temperature Range: -4 to 140°F (-20 to 60°C)
Item#:
6032
You must be logged in to order this item.
Log in here
The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4in. drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk's Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life.
Includes:
- Wireless Recessed Door Sensor
- Magnet
- Replaceable 3.6V Lithium battery
- 2 #4 x .5 in. Flat Head Sheet Metal Screws
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceiver
- Designed for wood and vinyl doors only
- Built-in tamper switch
- Frequency: 902 Mhz - 928 Mhz frequency hopping
- Dimensions: .75in. D x 2.5in. L Mag: .75in. D x .625in. L
- Maximum Operating Gap: 3/4 in.
- Battery: 3.6V Lithium 1/2 AA size
- Tamper Switch: Circuit Board Cover
Item#:
6023BR
You must be logged in to order this item.
Log in here
Double Sided Mounting Tape with an aggressive pressure sensitive permanent adhesive on both sides. Package contains an assortment of three (3) thicknesses; 1/16", 1/8", and 1/4". This tape can be used in place of mechanical fasteners to mount relays, siren drivers, and many other devices to various surfaces. It is flexible and conforms to irregular surfaces.
- Aggressive Permanent Adhesive
- Closed Cell Foam
- Flexible, Conforms To Irregular Surfaces
- Hundreds Of Uses And Applications
- Ideal For Mounting Circuit Boards
- Assortment of Thicknesses
- Handy Reusable Poly Storage Box
- 156 Pre-cut Pieces
- Individual Piece Size: 1/2" x 1-1/2"
- Thickness (52 pieces of each): 1/16", 1/8", 1/4"
Item#:
999A
You must be logged in to order this item.
Log in here
The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp.
- Super Low 1.2 mA Trigger Current
- Positive (+) Or Negative (-) Trigger Input
- Double Form "C" Contacts DPDT
- Heavy Duty Contact Rating
- On Board LED Status Indicator
- Includes Double Sided Mounting Tape
- Mounts in Standard 2.75" Snap Track
- Packaged in Reusable Poly Storage Box
- Operating Voltage: 12 or 24 Volts DC, jumper selectable
- Current Draw: 60mA (both relays on)
- Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
- Size: 1.5" X 2.75"
- Trigger Voltage: 5 - 24VDC
- Trigger Current: 1.2mA @12 VDC
Item#:
9244
You must be logged in to order this item.
Log in here
The ELK-6011 Single Button Panic Sensor has a stylish new look and now has a replaceable battery! It features a Single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm.
Includes:
- ELK-6011 Panic Button
- 3V Lithium Coin Cell Battery
- 30 inch Clear Plastic Lanyard
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Single press and hold button and red LED feedback indicator
- Water resistant lanyard included
- 902 Mhz - 928 Mhz frequency hopping
- Size: 1.50 in. W x 2.32 in. L x .50 in. D
- Battery: CR2032 Lithium Coin Cell
Item#:
6011
You must be logged in to order this item.
Log in here
Camera, Ip 2.0 Mp Camera, E3 E c/En
This item has been discontinued and replaced by item
ENTRY-CAM
Item#:
720-100128
You must be logged in to order this item.
Log in here
The ELK-6051 combines a proven, high reliability electro-chemical carbon monoxide sensor with ELK’s Two-Way Wireless technology for M1 Controls. The sensor has a 10-year life and the unit operates from 2 AAA batteries.
AudioLINK diagnostic app provides event data from sensor.
- Proven, high-reliability, electro-chemical carbon monoxide sensor with 10-year life
- Easy to understand LED indicators provide clear visual indication of alarms, faults, power and RF acknowledgment
- Diagnostic smartphone app simplifies field testing
- Individual units provides visual & audible alarm
- Communicates to M1, activating hardwired sounders & alert to Central Station
Item#:
6051
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
This wireless keychain remote (FOB) provides 4 push buttons, LED feedback indicator and features Elk's industry leading two-way technology. From the remote it is possible to arm, disarm, check status, and trigger a panic alarm.
Includes:
- ELK-6010 Keyfob
- Replaceable 3V Lithium Coin Cell Battery (CR2032)
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Status inquiry button & LED indicator provide arm, disarm, and alarm memory status
- 902 Mhz - 928 Mhz frequency hopping
- Dimensions: 1.50 in. W x 2.32 in. L x .50 in. D
- Battery: CR2032 Lithium Coin Cell
Item#:
6010
You must be logged in to order this item.
Log in here
The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4in. drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk's Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life.
| Includes: |
- Wireless Recessed Door Sensor
- Magnet
- Replaceable 3.6V Lithium battery
- 2 #4 x .5 in. Flat Head Sheet Metal Screws
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceiver
- Designed for wood and vinyl doors only
- Built-in tamper switch
- Frequency: 902 Mhz - 928 Mhz frequency hopping
- Dimensions: .75in. D x 2.5in. L Mag: .75in. D x .625in. L
- Maximum Operating Gap: 3/4 in.
- Battery: 3.6V Lithium 1/2 AA size
- Tamper Switch: Circuit Board Cover
Item#:
6023
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)