S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Compatible with the HS2016, HS2032, HS2064 and HS2128 control panels.
Contains:
(1) HS2032NK control panel in a PC5003C cabinet
(1) HS2LCDRF9ENG Full Message LCD Hardwired Keypad with Built-in PowerG Transceiver
(1) BD4-12 12V, 4Ah battery
(1) PTD1640U standard efficiency transformer
(1) SD15WULF indoor siren
Features:
- 4G LTE cellular module
- Works with Verizon Network
- Compatible with Alarm.com
- US Only
- GC2 Requires FW v1.19 or newer
- Includes 2 (two) LTE Antennas in the box with the radio
When the PG9934P is armed and the PIR sensor detects movement, the detector activates the camera, sends an alert to the system and images are sent via ethernet or cellular to the monitoring station. The central monitoring station staff can then review the images to verify the alarm and respond accordingly. The PG9934P also operates in total darkness, making it a fundamental tool to deliver visual alarm verification.
With minimal installation time required, the PG9934P Wireless PIR Motion Detector with Integrated Camera reduces on-site time and increases productivity and revenue. The compact design, wireless capability and battery power of this detector offers home and business owners more installation choices, including locations where wiring is difficult or impossible.
Features:
- Visual alarm verification in day and night
- Full color, high-resolution images transmitted from the premises via Cellular or Ethernet
- CMOS camera with IR illumination
- Auto-setup for brightness and contrast via the control panel
- Front cover and back tamper
- Pet immune up to 85 lbs (38kg)
- Dimensions: 125 x 63 x 60mm (4.9 x 2.5 x 2.4in)
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Provides security coverage up to 30' in a large open area
- Use to create rules such as "When someone enters the room, turn on light" or "Trigger alarm when intruder detected"
- Pet immune up to 40 lbs
- Code outputs: paring, tamper, tamper restore, alarm detect motion, alarm restore, supervisory, low battery
- Transmitter frequency: 319.5MHZ +-15KHz
- Transmitter bandwidth: 24KHZ
- Modulation type: ASK-OOK
- RF output power 91.1dBuV +/- 5% at 3m
- Sensor Range 30 ft (9.1 m) x 40 ft (12.2 m)
- Maximum Horizontal Sensing Angle 80°
- Operating Temperature: -10C~50C
- Relative Humidity: 5-95%
- Non-Condensing Storage Temperature: -40C to 80C
The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch.
When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the HUSK-20, use the key provided. The housing is made of metal and is painted gray.
The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a burglar control panel. That signal in turn will send the immediate signal to police or central station.
Features:
- Dual communication paths - If the Internet connection is interrupted or the LAN goes down, always-on 5G cellular will immediately step in.
- Powers directly from the fire panel’s 12V auxiliary power supply or via plug-in transformer (included).
- Uses LTE-M bands for 4G and 5G network compatibility, better building penetration, and longest product life.
- Interfaces with panel over the dialer (DACT) connection for universal compatibility.
- Telguard communicators are compatible with more alarm formats than any other brand. The signal will reliably get to the central station.
S2K Administration - Form Template Display
Actions