S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsThe WS4985 Flood Detector is a wireless detector designed to work with the Alexor Wireless Panel as well as DSC 1-Way Wireless Receivers (see Compatibility List for further details). The WS4985 Flood Detector senses the presence of water in basements, laundry rooms, bathrooms, kitchen and numerous other areas where water may leak or flood, prompting advance warning of potential flooding.
The WS4985 is a 1-way wireless transmitter consisting of a probe connected to a wireless transmitter via a 6-foot (1.82 m) wire. The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height. In the event that there is a water leak, the probe will detect the moisture and deliver the information to the transmitter on the wall. The transmitter then sends the signal to either the Alexor Wireless Panel or DSC 1-Way Wireless Receivers to trigger the alarm. It is important to note that although the probe is sensitive, it has been designed to be immune to false triggers such as floor mopping, because the sensor head is recessed into the probes housing.
If the WS4985 is ever damaged or tampered with perhaps if the wire between the transmitter and the probe is cut), its trouble status will immediately signal the Alexor or DSC 1-Way Wireless Receivers and the device will instantly notify the alarm system. The detector also communicates low battery issues
Features:
- Based on WS4945 wireless door/window contact
- Water probe through a (1.8 m )6 foot-wire
- Fully supervised
- Built-in reed switch
- Normally closed external contact input
- 1 lithium battery included
- Case and wall tamper
- End-of-line resistor
- 4 year battery life
Features
- Rapid Opening / Closing Action
- Indoor Outdoor Use
- Provides Remote Shut off of Main Water Supply
- Manual override handle
- Integrates with a Security or Automation Control (e.g. Elk-M1G or M1EZ8)
- Can be Integrated with a Simple “Easy” Button
- Can be Integrated with a Wireless Receiver and Wireless Pushbutton
- Simple 12 VDC, Four (4) Conductor Hookup
- Valve Direction/Water Flow Indication
- Two (2) Year Warranty
- Full Port, 2-way Ball Valve
- Stainless Steel Grade 316
- NSF61 Approved for Drinking Water
- 1" NPT threaded pipe connections
- Requires a 12 Volts DC Power Supply
- Nominal Current Draw: 800 mA to 1.5 Amp
- Actuating Speed: < 2 seconds
- NEMA 6P & 7D Enclosure
- Torque: 1.25 in. lbs.
- Connections: 18 gauge, 4 conductor cord
- Overall Dimensions: 7.75" H, 4.5" W, 4" D