Home  >  INTRUSION  > (x)
|◀ 3349 - 3360 of 3915 ▶|
View:
You must be logged in to order this item. Log in here
Item#:
RE11111
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Includes 64 zone self contained wireless alarm system with CP-01 software and built-in two-way voice, an integrated HSPA (3G) cellular communicator, a 7.2V NI-MH battery, high efficiency transformer, telephone jack and cord and English user and installation manuals.
Item#:
SCW457LEAT
You must be logged in to order this item. Log in here
Perfect sensor to alert the home owner of a flood or excessive change in temperature.
Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.
Item#:
2GIG-FT1E-345
You must be logged in to order this item. Log in here

Features:

  • High efficiency switching power supply
  • 120 VAC @ 60 Hz input
  • 14 VDC @ 1700 mA output
  • 10 foot cable
  • Barrel connector simplifies installation process
  • For use with GC2 or GC3 panels

Item#:
2GIG-AC2-PLUG
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The WT4901 Wireless Indoor Siren is a fully supervised wireless siren designed to work with the Alexor Wireless Panel. With its sleek and modern design, the WT4901 will fit most internal spaces and is unobtrusive to the home environment. Since Alexor is mounted in a secure (but sometimes remote) location within the home, audible indications, via Alexor's onboard siren, regarding alarm triggers or smoke/fire detection may be quieter than what the WT4901 provides. And an indoor siren provides an alert to potential danger before a person moves too far into the home. With its powerful sounder, the WT4901 will annunciate these issues from its remote location but will not indicate the location of the control panel. The WT4901 also distinguishes between burglar and fire alarm by emitting different sounds for each and indicates entry and exit delays, trouble beeps and uses multiple door chimes.

Since the WT4901 is wireless, it can be installed in numerous locations inside the home. And because its wireless, installation time is quick with fewer holes to drill meaning mess-free installs and more installs throughout the day.

The WT4901 offers 2-Way wireless and continuously supervised communication with the Alexor Wireless Panel. The signals between the WT4901 and the panel are fully encrypted, prohibiting unauthorized interruption of communication between the two. If the WT4901 is tampered with, Alexor will immediately be signaled and the appropriate transmission will instantly be transmitted to the monitoring station. Additionally, one of the other sirens (either indoor or outdoor or Alexor's onboard siren itself) installed on the system will make up for the absence of the WT4901. Up to four sirens can be installed on the Alexor Wireless Panel.

Features:

  • Siren Output  85dB
  • Siren sounds for alarms, door chimes, entry/exit delay and troubles
  • Transmits RF status, low battery and tamper condition
  • Front and back tamper detection
  • Nominal battery life - 1 year
  • Compatible with IMPASSA 433MHz
  • Onboard test button

Item#:
WT4901
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 3349 - 3360 of 3915 ▶|
View:
(Denotes required field.)