Home  >  INTRUSION  > (x)
|◀ ◀ 2665 - 2676 of 3916 ▶ ▶|
View:

UPB Interface for M1G & M1EZ8 Controls

The ELK-M1PCSPIM is a special Powerline Interface Module containing a built-in M1XSP Serial Port chip. This all-in-one device makes it easy to permanently connect the ELK M1 Control to a UPB network. Simply locate a convenient unused AC Power Outlet, connect a cable from the M1 data bus to the four (4) terminals on the ELKM1 PCSPIM, and perform an M1 data bus enrollment. The long distance capability of the M1 data bus makes it possible to locate the ELKM1 PCSPIM virtually anywhere, without a lot of complex or ugly cabling or connections. UPB utilizes the AC wiring circuit for transmission, without new or additional wiring, and without radio frequency signals.
  • All-in-one device for interfacing M1 with UPB.
  • Compact interface requires small amount of space
  • Easy hookup - requires only the 4-wire data bus connection. * NO 9-Pin Serial Cable * 
  • Includes UPB Status light (multicolored) AND a M1 Data Bus Status Light (Green) -- enhances the ability to diagnose and troubleshoot
  • Lower cost than purchasing separate and M1XSP and PCSPIM products.
  • Removable 4-pin terminal block connection
  • Power: 
    • -UPB Network circuitry – powered from the AC "Primary" Line.
    • -M1 Data Bus Device circuitry – powered (12VDC) from the M1 Data Bus (+) & (-) terminals. 
    • NOTE: Loss of AC primary power should not result in a missing data bus device trouble.
  • Current Draw from M1: ~30mA @ 12 VDC
  • M1 Bus Device Address: Preset at Address #7 [Requires bus module enrollment]
  • Firmware required: 1.0.42 (std. firmware) or later
Item#:
M1PCSPIM
You must be logged in to order this item. Log in here

LCD Keypad, BLUE LCD, 32 Character Alphanumeric

The ELK-M1KP is an addressable LCD Keypad for M1 Controls. It features a 32 character, backlit display with adjustable intensity and extra large character fonts, improving readability. Six (6) function ("F") keys can be programmed to contact emergency services or perform tasks; such as, controlling lights, watering the lawn, closing or opening the garage door, etc. The ELK navigation keys easily guide you through the full list of automation tasks, programming, systems diagnostics, and more. An optional plug-in proximity reader is available allowing prox card or fob arming, disarming, door strike control, etc. The fold down door features magnetic closure and can be completely removed, if desired.
  • Backlit, Large Character LCD Display, 16 x 2 lines
  • Blue LCD Display
  • Six (6) programmable function keys
  • Unique Menu Navigation/Direction keys
  • Adjustable volume for tones/chime
  • Accepts Plug-in Proximity Reader (ELK-M1PR) or "External" 26 bit Wiegand Prox Reader
  • Built-in Temperature Sensor
  • Input for 1 Supervised Zone
  • One Programmable "Switched Positive" Voltage Output
  • Exit, Stay, Chime, and Bypass Keys
  • Programmable display of time, date, & temperature
  • Displays system diagnostics and settings
  • Input Connection: 6 Pin Plug-In "Flying Lead" Connector (Included)
  • Operating Voltage: 13.8 Volts DC
  • Current Draw: 40-50mA Idle (low backlight, sound silent) 160mA fully active
  • Color: White
  • Size: 6.875" x 5.25" x 1.375"
Item#:
M1KPB
You must be logged in to order this item. Log in here

PHOTO BEAM 120/240M QUAD 4CH

Item#:
ISC-FPB1-W120QF
You must be logged in to order this item. Log in here

32 Point GEM-C Commercial Combo - Fire/Burg System Kit

32 Point GEM-C Commercial Combo. Fire/Burg System Kit:24V Panel, 32 Points via commercial addressable, wireless or conventional fire or burg. devices, 2 on board NACs, 8 partitions (No Loop Isolator/Extender required)

Includes:

  • Locking, Medium Red Enclosure, 16 x 17 in. door, with 14.25 in. x 16 in. base. Houses up to 16Ah battery backup.
  • GEMC-PS24V7A-R 7Amp,24V Power Supply
  • GEMC-BM/PS Burg Module, with Power Supply, provides isolated 4-wire Burg bus, plus independent Burg Bell output. Provides complete separation of Fire and Burg power, plus Burg battery charger to allow independent Burg standby operation in case of power failure
  • GEMC-FW-SLC 32 Point Addressable Fire SLC Module
  • GEMC-FK1 Red LCD Fire Keypad
Item#:
GEMC-COMBO32KT
You must be logged in to order this item. Log in here

COVER,SPKR/STRB,RED nesis, Red, No Marking

Item#:
EG4SVRN-CVR
You must be logged in to order this item. Log in here

40' x 90 Wide Angle, Dual Ele ment, Dual Zone Detection, Rel

Item#:
MS-12TE
You must be logged in to order this item. Log in here

CLG HORN,WHT,FIRE ing. Room Side Wiring Plate in

Item#:
EGCAWF
You must be logged in to order this item. Log in here

IQ Panel 4 PowerG Kit - AT&T

The Qolsys IQP4018-KIT-PG IQ Panel 4 "PowerG Kit" for AT&T

Kit  Includes:

  • (1) PowerG, 7" All In One HD Touchscreen
  • (2) PowerG DW Sensors (PG9303)
  • (1) PowerG Motion Sensor (PG9914)

The elegant 7” HD All-In-One touchscreen has an upgraded 8 Megapixel Panel Camera with Flex-Tilt to adjust camera angle for disarm photos, peek in, and alarm videos. The new QuadSound speaker system allows Music Streaming over Bluetooth, and SmartMount installation system provides easy wall or table stand mounting options, including the new IQ Base Table Stand Subwoofer. Dual SRF featuring PowerG provides long range secure encrypted wireless with compatibility for legacy security wireless already installed in the home or building.

Features

  • 7" LCD (1280 x 800) Touchscreen
  • Easiest Installation - SmartMount system, all internal antennas, on-screen Installation Wizard
  • QuadSound Audio Streaming - Bluetooth Audio from your Smart Phone using four 4 watt speakers
  • Best Built-in Camera - 8MP 120° wide angle camera w/ FlexTilt. Peek-in, Disarm Photos, Alarm Videos
  • Better All-In-One Range - LTE and WiFi Dual-Path, Dual SRF featuring PowerG, Z-Wave 700 Series, Bluetooth 4.2
  • Best Differentiating Features - Bluetooth Touchless Disarming, Live View, Live Answer, Built-in Glass Break
  • Best Integrations - Best in class Residential, Commercial, MDU, Builder, Wellness support
  • Dimensions 6.1”H x 7.5”W x 1”D (155mm x 191mm x 26mm
Item#:
IQP4018-KIT-PG
You must be logged in to order this item. Log in here

Automatic Bean Alignment Tool (only compatible with SL serie

The BAU-4 beam alignment unit automatically and accurately adjusts the optical axis. This allows peak performance and give one technician the ability to align a 650ft. (200m) SL Series detector without additional help.

Item#:
BAU-4
You must be logged in to order this item. Log in here

*IQ Keypad-PG, PowerG 915 MHz

Item#:
IQKP-915
You must be logged in to order this item. Log in here

Voltage Out Board - Converts 1 2 Pin (J16) to Screw Terminals

Converts 12 conductor ribbon cable connections to screw terminal connections.
  • Compatible with positive voltage outputs of M1 controls and M1XOVR output expanders
  • Simplifies connections for quicker and neater installations
Item#:
M1VO
You must be logged in to order this item. Log in here

Replacement cover and lens fo r the LX-802N

Item#:
LX-802NCL
You must be logged in to order this item. Log in here
|◀ ◀ 2665 - 2676 of 3916 ▶ ▶|
View:
(Denotes required field.)