Home  >  INTRUSION  > (x)
|◀ 181 - 192 of 4409 ▶|
View:
The ELK-M1XRF2H is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. This receiver is compatible with Honeywell (Ademco) 5800 series wireless transmitters. The M1XRF2H connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF2H can handle up to 144 wireless zones (e.g. transmitter sensors or points).
Multiple M1XRF2H receivers can be installed on the data bus allowing hundreds if not thousands of square feet to be covered by strategically placing each receiver in a different location.
  • Adds up to 144 individual wireless zones (sensors/points) 
  • Operates from the 4 wire M1 RS485 Data Bus 
  • Additional Receivers (up to 11) may be connected to a single M1 or M1EZ8 Control for redundancy or greater coverage 
  • Flash Memory for Updating of operating Firmware 
  • Sensitivity: >105 dbm 
  • Operating Temperature: 0 to 120 degrees F 
  • Operating Voltage: 12 Volts D.C. 
  • Current Draw: 70mA 
  • Indoor Range: 300 to 500 ft. line of sight
Item#:
M1XRF2H
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Features:

  • Deluxe 32-character backlit, menu-driven, dual-line display
  • Custom alphanumeric zone directory
  • Built-in 4 Zone expansion module
  • Display of wireless transmitter signal strength 1-10
  • EZ Keypad Programming2 with actual Q&A's to step through configuration
  • Large soft touch backlit keys with tone
  • Backlit displays for easy reading
  • Wireless transmitter signal strength indication
  • Decor friendly soft white design
  • Fire, police and auxiliary programmable panic keys
  • Fingertip reference chart
Item#:
GEM-RP1CAE2
You must be logged in to order this item. Log in here
Small, economical, arm/disarm station for M1 Controls which fits into a single gang box and utilizes a standard decorator style faceplate (not included). Particularly well suited for partitioned jobs such as an office, workshop, garage, etc., but can also be used as the main keypad for any installation. Displays basic system status with 3 LEDs: Green "Ready", Yellow "Trouble", and Red "Armed". The 12 button keypad is backlit with blue LEDs and has quick arm keys for "EXIT" and "STAY". The M1KPAS also provides access to six (6) programmable function operations by pressing the "F" key followed by the number key (1-6) within 5 seconds.
  • Blue Backlit Keys 
  • Quick Arm Exit & Stay Keys 
  • LED Status Indication 
  • Instant Activation of 6 Tasks 
  • Operates from M1G or EZ8 "RS-485" Data Bus 
  • Built-in Piezo Sounder
  • Connection: 4 Pin Plug-in "Flying Lead" Connector (Included) 
  • Color: White 
  • Operating Voltage: 13.8VDC
Item#:
M1KPAS
You must be logged in to order this item. Log in here

High output, very low current draw, dual channel siren drivers. They are designed to work with alarm panels with limited current capability.

Features:

  • Two (2) channel operation - steady or yelp.
  • Very low current draw.
  • Parallel or series speaker wiring
  • 103 db @ 10 ft. @ 6V - 8 Ohms
  • 105 db @ 10 ft. @ 6V - 4 Ohms
  • 106 db @ 10 ft. @ 12V - 8 Ohms
  • 111 db @ 10 ft. @ 12V - 4 Ohms

Item#:
ALSD2
You must be logged in to order this item. Log in here

Commercial Series TriTech Detector 50 ft. x 50 ft.

This item has been discontinued and replaced by item 

Features:

  • Passive infrared and microwave Doppler radar detection with First Step Processing for superior catch performance and best-in-class false alarm immunity
  • Microwave Noise Adaptive processing  reduce false alarms from repetitive sources
  • Integrated EOL resistors. Reduces installation time and complexity
  • Flexible Mounting Height, No Adjustments  reduce installation time and false alarms, improve catch performance
  • Cloak and Camouflage Detection Technology (C2DT)

Item#:
ISC-CDL1-W15G
You must be logged in to order this item. Log in here

The ELK-M1KP2 is a low profile, addressable LCD Keypad for the M1 family of Cross Platform Controls®. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. It may also be recess 'flush' mounted using with a separately purchased back box kit (ELK-M1BBK2). The M1KP2 is compatible with "external" 26 bit Wiegand compatible proximity readers, allowing cards or fobs to be used for arming, disarming, or limited door strike control, etc.
Includes:

  • Low Profile LCD Keypad with Blue Display
  • 1 each Multicolor Labels
  • 4 #6 Flat Head Phillips Sheet Metal Screw
  • 4 #4-20 Pan Head Phillips Plastite Screw
  • 1 2200 Ohm Resistor
  • 5 Gel Filled B-Connector
  • 1 Mini Jumper
  • 6-wire Flying Lead Cable Assembly
  • Instructions
Features:
  • Blue/white Backlighted Hi-Contrast LCD Display
  • Four (4) Programmable Function Keys
  • Unique Menu Navigation/Direction Keys
  • Operates from the M1/EZ8 RS-485 Data Bus
  • Built-in Piezo Sounder with adjustable pitch
  • Accepts "External" 26 bit Wiegand Prox Reader (Optional)
  • Input for 1 Supervised Zone
  • One Programmable "Switched Positive" Voltage Output
  • Exit, Stay, Chime, and Bypass Keys
  • Surface mounts to a standard 1 or 2 gang electrical box
  • Optional recess 'flush' mount kit available (ELK-M1BBK2)
Specifications:
  • Connection: 6 Pin Plug-in "Flying Lead" Connector (Included)
  • Color: White
  • Operating Voltage: 13.8 VDC
  • Current Draw: ~30 mA Idle (low back light level, sounder silent) ~85mA Fully Active (max. back light & sounder active)
  • Size: 4.658 in. W x 5.5 in. H x .95 in. D (.375 in. D with recess mount)
Item#:
M1KP2
You must be logged in to order this item. Log in here

NEO ICON Hardwired Keypad with English function keys. Compatible with the HS2016, HS2032, HS2064 and HS2128 control panels.

Features

  • Up to 128 hardwired or wireless zones supported
  • Modern, slim-line landscape keypad
  • White backlit keys
  • Blue LCD display
  • 5 programmable function keys
  • Input/Output terminal
  • Fire, medical and panic keys
  • Adjustable backlight and keypad buzzer
  • Available with English function keys
  • Proximity with MPT mini prox tags
Item#:
HS2ICNENG
You must be logged in to order this item. Log in here
IQ4 HUB part #:IQPH0XX
  • Affordable All-in-One
    • 8 Core Processor, LTE & Wi-Fi Dual Path, 7" Touchscreen
  • Choose Your Version
    • PowerG or S-Line or Interlogix or 2Gig or DSC or Honeywell
  • Automation
    • Z-Wave 800, lights, locks, thermostats, garage doors
  • Video
    • Live View, Live Answer doorbell & cameras on screen
  • Bluetooth
    • Touchless disarming music streaming
  • Easy Installation
    • SmartMount, Install Wizard, on-screen diagnotics & more
Item#:
IQPH053
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The Inovonics high power repeater with transformer intelligently amplifies transmission from any EchoStream series transmitter while ignoring background noise. The repeater is perfect for large facilities such as multi-floor buildings, multi-building sites, shopping malls, campuses and other open-air installations. Virtually any number of repeaters can be added to a system, scaling the system size as needed.

Features:

  • Includes 120 VAC power transformer
  • Includes backup battery
  • No wires or programming needed
  • Self configuring
  • Case tamper protection
  • UL listed

Item#:
EN5040-T
You must be logged in to order this item. Log in here
|◀ 181 - 192 of 4409 ▶|
View:
(Denotes required field.)