Home  >  INTRUSION  > (x)
|◀ ◀ 109 - 120 of 4299 ▶ ▶|
View:

Firmware Update Cable for GC2 & TS1

Features:

  • Quickly and easily update the GC2 or TS1 without incurring the OTA update charges from a remote services provider
  • Connect a PC directly to a GC2 or TS1 using the Firmware Update Cable to update them to the latest firmware
  • 4-pin TS1 adapter included

Item#:
2GIG-UPCBL2
You must be logged in to order this item. Log in here

SW SET, SURFACE MOUNT WHT -NO 1" GAP GRI LOGO

Item#:
29A-W
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

SMP3E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5A continuous supply current. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.
  • Power supply/charger with enclosure.
  • Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries.

Specifications:
Input:
  • 6VDC or 12VDC output use TP1640 or 24VDC output use T2428100.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3E
You must be logged in to order this item. Log in here

Combination Mini Switch & Magnet, 12 in. Lead Stick - White

Item#:
QPC110WC
You must be logged in to order this item. Log in here

SW, PUSH BUTTON FLANGED INAL SPST-NO WHITE

Item#:
PBF-100T-W
You must be logged in to order this item. Log in here

Surface Mount AL Gate Contact SPDT, 3"Gap, 3 1/2" L X 2 1/2"

Item#:
QPC2507A-L
You must be logged in to order this item. Log in here

Recessed Door/Window Contact, 345Mhz

The 2GIG Recessed Door Contact is the industrys most flexible supervised door contact. It communicates with the 2GIG Control Panel using the 345 MHz wireless frequency. It also allows a multitude of applications while hiding the transmitter within a door or window frame.

Features:

  • Recessed Door Contact
  • Compact size, only 2-1/2in. long
  • Fully supervised
  • Rare earth magnet
  • Lithium battery
  • ETL listed

Item#:
2GIG-DW20R-345
You must be logged in to order this item. Log in here

SW SET, 1/2" DIA REC. SHORT RMINAL W/ MM-150RS-W WHT

Item#:
150RS-T-W
You must be logged in to order this item. Log in here

SW SET, SURF MNT PULL APART " JACKETED CBL SPDT 10/17 AT

Item#:
4704
You must be logged in to order this item. Log in here

TAMPER SWITCH, SPST-NO ACKET

Item#:
TSC-20
You must be logged in to order this item. Log in here

Motion Detector Damage Stopper

Features:

  • Guard helps protect against vandalism and damage
  • Helps reduce malfunctions and high maintenance costs
  • 9-gauge coated steel wire
  • Does not interfere with the effective range of any protected motion detector
  • Fast and easy installation
  • 7 in H x 5.75 in W x 4.5 in D

Item#:
STI-9621
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 4A, 24/28VAC, Board

SMP5 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Trac compatible (order Altronix model number ST3).

Specifications:
Input:
  • 6VDC applications use TP1640.
  • 12VDC applications use T2428100.
  • 24VDC applications use T2428175.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 4A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 13 BTU/Hr.
    • 12VDC: 25 BTU/Hr.
    • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC: 55.2VA.
    • 12VDC/24VDC: 115VA.

Item#:
SMP5
You must be logged in to order this item. Log in here
|◀ ◀ 109 - 120 of 4299 ▶ ▶|
View:
(Denotes required field.)