Home  >  MARK DOWNS  > (x)
|◀ ◀ 229 - 240 of 306 ▶ ▶|
View:

Dual Action Hold-up Switch TYP

The HUSD-15B Series is a Form C (SPDT), dual button hold-up switch that is designed to generate an alarm condition only when both buttons are pressed simultaneously, thus preventing accidental triggering.

  • Dual button activation to eliminate accidental triggering
  • SPDT transfer contact for supervised loop
  • Terminal strip with three wire terminals
  • Tamper protected switch mechanism using UL listed microswitch
  • Concealed mounting screw
  • Status window indicator
  • White plastic case housing
  • HUSD-15BL latching button,tool reset (included)
Item#:
4370036
You must be logged in to order this item. Log in here

6U LN WM Swing-Out - Vented D oor

Item#:
3132-3-001-06
You must be logged in to order this item. Log in here

single gc3e faceplate

Item#:
2GIG-GC3E-FACEPLATE
You must be logged in to order this item. Log in here

Horn/Strobe Damage Stopper w/E nc Bkbx, 4" Deep

Item#:
STI-1210A
You must be logged in to order this item. Log in here

6-1/2" Frameless In-Ceiling Sp eaker - K (PAIR)

Item#:
SC-620F
You must be logged in to order this item. Log in here

SPACER FOR ML120 DOUBLE MAG- LOCK

Item#:
PEAKML120DBLSPACER
You must be logged in to order this item. Log in here

MAGIC SWITCH, 3/4" DIA. RECESS oor, Normally Open, Brown

Item#:
1078C-M EDWARDS
You must be logged in to order this item. Log in here

Network Cable, Cat6, UTP Male / RJ45 Male, 0.15 m (0.5

Item#:
347426
You must be logged in to order this item. Log in here

Color Mini Dome Indoor, 600TVL, 3.6mm, 3 Axis, Low Illumination

  • 600TVL Image Resolution
  • 3.6mm/F2.0 Board Lens
  • 12VDC Voltage
  • 1/3 in. SHARP CCD Image Sensor
  • 150mA Power consumption
  • AGC & Auto White Balance
  • 14-122F (-10-50C) Operating Temperature

Item#:
PEAKCMD600A136
You must be logged in to order this item. Log in here

6 Pack IS310WH Request to Exit Sensors, White

Honeywell's Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal "tamper proof" shutters to enable precise target area detection.
  • Adjustable relay time (0.5 - 64 seconds)
  • Micro-based signal processing
  • Adjustable "tamper proof" shutters— to enable precise target area detection
  • Two "Form C" outputs
  • Swivel optics – allow for offset mounting
  • Patented black bug guard
  • Available in white or black
Item#:
RTE6PKWH
You must be logged in to order this item. Log in here

Movable Mounting Kit for SC100 Series Shock Detectors

Item#:
SC111
You must be logged in to order this item. Log in here

Heavy Duty Electric Strike Kit

  • BHMA Grade 1 Electric Strike: heavy duty construction, 1,000,000+ Life cycles -- 3,250+ lbs. Holding Force
  • Four popular faceplates included: including the 4 most used faceplates in the box makes specifying and installing easy Covers 90%+ of Cylindrical & Mortise Lock configurations (without deadbolt), plus faceplates can be kept & used to help accomodate for door sag.
  • 1 - 3/8" Shallow backset: the 4100 low profile electric strike can be used in 2" fire rated frames with 1/2" sheetrock ingress
  • Low Current Draw: .240 Amp at 12DC makes it very PoE Friendly 12 & 24DC :: 12 through 24 AC. All the low voltage and amperage flexibility you need
  • The included CCTS covers the gap when retrofitting the HES 1006, Folger Adams 712/732, and Von Duprin 6200 Series or even Trine EN Series strikes. No more ugly trim skirts. The CCTS always matches the faceplate finish.
  • Cutout Specification A115.1 (with Slight Jamb Modification)
Item#:
4100-32D
You must be logged in to order this item. Log in here
|◀ ◀ 229 - 240 of 306 ▶ ▶|
View:
(Denotes required field.)