Features

• Commercial fire internet communicator
• Works with any control panel that communicates using contact ID format
• Configured for standalone commercial fire applications
• Compliant with NFPA72 Editions: 2002, 2007, 2010, 2013
• Power supply included
• Compatible with most control panels that use the Contact ID format
• 128-bit AES encryption (NIST approved)
• Supports DHCP (dynamic IP addresses)
• Low network bandwidth requirements
• Reports events to 2 different receiver IP addresses
• UL standard & encrypted line security
• 4 on-board programmable zone inputs and 2 programmable voltage outputs as standalone module
• Programmable through the PK5500 LCD keypad or T-Link Console software
• Software upgrades via network
• Compatible with Sur-Gard System I/II/III/IV/V monitoring station receivers
• ULC Passive or active security levels
• ULC active line security levels A1-A4
• Polling and hardware substitution protection

PRODUCT FEATURES

• Powers directly from a 12 or 24VDC alarm panel — no electrician needed for an outlet.  Or, for AC, use included plug-in adapter.
• Operates on LTE-M networks, for 5G longevity, lower power consumption, and better in-building penetration.
• Interfaces with fire panels using a single DACT connection for universal compatibility.  
• American made and backed by award-winning, US-based tech support.
• Dial capture allows for easy plug-and-play
• Compliant with 2019 and earlier editions of NFPA 72
• Meets UL 864 requirements for sole, primary or backup path communications
• 5-minute or 60-minute supervision

The Fire-Watch 411 series from Fire-Lite Alarms are compact slave Digital Alarm Communicator Transmitters (DACTs) that are designed for a variety of fire, and non-fire applications. They provide either three or four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require a Fire Alarm control panel to transmit system status to an off-site monitoring facility for central or Remote Station compliance.

Features

• Four monitoring channels (inputs).
• Inputs may be individually programmed to monitor the host control panel for:
  • Fire Alarm.
  • Fire Trouble.
  • Fire Supervisory.
  • Process Monitoring.
  • AC Power Loss.
  • Security Alarm.
  • Other (Fire and Non-Fire Events).
• ully supervised trigger inputs require a contact closure for activation.
• 12- or 24-VDC operation, jumper-selectable.
• Industry-first, UL recognized, dialer-runaway prevention feature.
• Dual-line, rotary or touch-tone-dial DACT interfaces to public switched telephone network (leased phone lines are not required).
• Includes 15 reporting formats, including the popular ADEMCO Contact ID format.