View:

    Combination FACP / Commercial Fire Cellular Communicator.
    Supports 8 conventional zones, expandable to 32 through analog addressable, wireless and conventional fire devices.
    2 programmable NAC circuits, 2A each @ 24V.
    Fire annunciator on door, support for up to 6 additional remote annunciators.
    No programming required, pre-programmed with sprinkler supervisory / basic fire program. Advanced programming Over The Air
    using NAPCO QuickLoader.
    System is completely prewired and assembled, just mount on wall,
    connect AC, ground, initiating and indicating devices and it is ready to go.
    Lowest Equipment Cost Available for Any Full-Featured Cell Reporting Fire Alarm Solution
    Saves Both Installation Time & Money
Item#:
FL-32FACP-LTEVS
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
FEATURES
™ Supports 12V and 24V FACPs
™ Sole path cellular, IP, or dual-path communications
™ CAT-M1 cellular is 5G-ready
™ Supports Contact ID reporting format
™ Trouble event detection and reporting
™ Four programmable input/outputs
™ Alarm capture via phone line interface or standard alarm outputs
™ UL certified for usage in commercial applications
™ At-a-glance system status via front panel LEDs 
Item#:
BAT-FIRE-VZ
You must be logged in to order this item. Log in here
Hardware Features:
• Dual SIM automatically picks from AT&T or Verizon networks for ultimate redundancy and reliability
• LTE-CAT-M1 network is 5G-ready for deep signal penetration inside buildings
• Meets UL 864 requirements for sole, primary or backup path communications
• Universal fire alarm control panel (FACP) compatibility and direct power from 24 volt FACP
• Introductory offer includes first year of cellular/IP service included in purchase price
• Enclosure kit sold separately (HW-AV-ENC)
Software Features:
• CLSS Site Manager provides a “bird’s eye” view of all your accounts and real-time information on event generation so you can diagnose before dispatch. Reduce unnecessary trips & improve your first-time fix rate.
• CLSS Facility Manager provides your end users with event alerts via browser or mobile app and access to asset information across multiple sites.
• CLSS CheckPoint allows you to deliver professional test reports before leaving your customer’s site.

Item#:
HW-AV-LTE-M
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Features

  • Commercial fire internet communicator
  • Works with any control panel that communicates using contact ID format
  • Configured for standalone commercial fire applications
  • Compliant with NFPA72 Editions: 2002, 2007, 2010, 2013
  • Power supply included
  • Compatible with most control panels that use the Contact ID format
  • 128-bit AES encryption (NIST approved)
  • Supports DHCP (dynamic IP addresses)
  • Low network bandwidth requirements
  • Reports events to 2 different receiver IP addresses
  • UL standard & encrypted line security
  • 4 on-board programmable zone inputs and 2 programmable voltage outputs as standalone module
  • Programmable through the PK5500 LCD keypad or T-Link Console software
  • Software upgrades via network
  • Compatible with Sur-Gard System I/II/III/IV/V monitoring station receivers
  • ULC Passive or active security levels
  • ULC active line security levels A1-A4
  • Polling and hardware substitution protection

Item#:
TL300CF
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
TG-7FE offers two pathways to reliably transmit signals: a wired LAN connection to the Internet and 5G LTE-M cellular. It operates on panel power or via plug-in transformer, and is available in AT&T or Verizon models.
PRODUCT FEATURES
  • Dual communication paths - If the Internet connection is interrupted or the LAN goes down, always-on 5G cellular will immediately step in.
  • Powers directly from the fire panel’s 12V/24V auxiliary power supply or via plug-in transformer (included).
  • Uses LTE-M bands for 4G and 5G network compatibility, better building penetration, and longest product life.
  • Interfaces with panel over a single DACT connection for universal compatibility (use TG-PEM accessory when panel has no DACT).
  • Telguard communicators are compatible with more alarm formats than any other brand. The signal will reliably get to the central station. 
Item#:
TG-7FE-A
You must be logged in to order this item. Log in here
COMMERCIAL FIRE
Feature-rich, with updated technology, the Telguard TG-7FP is all about saving time and money. It starts with a bundled communicator solution that powers off the panel, is 4G/5G, and costs less to purchase and install.  Add to that the savings your customers enjoy every month from replacing expensive landlines with economical cellular service.  Then, top it all off with the RMR that goes to you, not the Telco.
Item#:
TG7FPV
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
COMMERCIAL FIRE
Feature-rich, with updated technology, the Telguard TG-7FP is all about saving time and money. It starts with a bundled communicator solution that powers off the panel, is 4G/5G, and costs less to purchase and install.  Add to that the savings your customers enjoy every month from replacing expensive landlines with economical cellular service.  Then, top it all off with the RMR that goes to you, not the Telco.
Item#:
TG7FPA
You must be logged in to order this item. Log in here
View:
(Denotes required field.)