|◀ ◀ 1 - 12 of 23 ▶ ▶|
View:

2W I4 INTERFACE MODULE

Alarm Current: 174mA (max.); 116mA (12V In), 60mA (24V In)
Dimensions: Diameter: 6.4 in. ; Width: 6.04 in. ; Depth: 1.00 in
Mounting: 4-11/16 in. square back box or inside a metal enclosure
Operating Humidity Range: 5-95% RH
Operating Temperature Range: 0 – 50° C (32 — 122° F)
Operating Voltage: Nominal: 12/24 VDC; Minimum; 8.5 VDC; Maximum: 35 VDC (power limited)
Standby Current: 62mA (max.); 45mA (12V In); 27mA (24V In)
Weight: 9.6 oz. (272 g)
Wiring Gauge: 14-22 AWG

Item#:
COSMOD2W
You must be logged in to order this item. Log in here

PHOTOELECTRIC SMOKE DETECTOR W ITH BUILT-IN 85dB SOUNDER. USE

Item#:
FW-2S
You must be logged in to order this item. Log in here

Duct Smoke Detector, Conventional, 2 Wire, Photoelectric

  • Photoelectric, integrated low-flow technology
  • Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/sec)
  • Versatile mounting options in square or rectangular configuration with modular construction
  • Plug-in sensor
  • Superb false alarm immunity with the latest sensor technology
  • Broader ranges for operating temperature (−4°F to 158°F) and humidity (0% to 95% non-condensing)
  • Patented sampling tube installs from front or back of the detector with no tools required
  • A cover tamper feature to indicate a trouble condition for removed or improperly installed sensor cover
  • Increased wiring space with a newly added ¾ inch conduit knockout
  • Improved LED status
  • 24 VDC
  • Backward compatibility with existing Innovair products, including remote accessories
Item#:
D2
You must be logged in to order this item. Log in here

CO/Smoke Detector, 2-Wire Detector 12/24VDC

  • Single device for CO and smoke detection that uses less wiring and fewer junction boxes
  • Compatible with a wide range of control panels with the use of the required i4 Interface Module.
  • Sends distinct smoke and CO signals to the panel
  • Sounds Temporal 3 for smoke and Temporal 4 for CO
  • Built-in 85dB sounder
  • LEDs display both CO and smoke status
  • External IR LED provides extended range sensitivity testing
  • Versatile mounting allows for wall or ceiling placement
  • Easily replaceable electrochemical CO cell with 10-year end-of-life timer that signals the panel and chirps to alert the homeowner
  • RealTest® enables functional test using canned CO
  • Drift compensation and smoothing algorithms provide false alarm immunity
  • Compatible with SENS-RDR sensitivity tester
  • Full agency compliance with UL 268 and UL 2075
Item#:
COSMO-2W
You must be logged in to order this item. Log in here

2-Wire Photoelectric i3 Smoke Detector

Item#:
2W-B
You must be logged in to order this item. Log in here

2-Wire Photoelectric i3 Smoke Detector w./135F Fixed Thermal Sensor

Item#:
2WT-B
You must be logged in to order this item. Log in here

INTRINSICALLY SAFE PHOTOELECTR IC DETECTOR, NON UL

Item#:
SOC-E-IS
You must be logged in to order this item. Log in here

2-Wire Photoelectric i3 Smoke Detector w/Thermal Sensor & Built-in Sounder

Item#:
2WTA-B
You must be logged in to order this item. Log in here

2 Wire Smoke Detector with Heat

Item#:
FW2-H
You must be logged in to order this item. Log in here

BASE, 2-WIRE, 24 VDC, FORM C

Item#:
B116LP
You must be logged in to order this item. Log in here

2-Wire Base for 100 Series Smoke Detectors

SPECIFICATIONS
Base Diameter: 6.2 inches (157 mm)
Base Height: 0.95 inches (24 mm)
Weight: 0.3 lb. (137 g)
Mounting: 4-inch square box with or without plaster ring. Min. depth–1.5 inches 3-1/2-inch octagon box. Min. depth–1.5 inches

Operating Temperature Range: 0° to 49°C (32° to 120°F)
Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing
Item#:
B110LP
You must be logged in to order this item. Log in here

BASE, FLANGLESS- STANDARD EURO PEAN VERSION

Item#:
B401
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 23 ▶ ▶|
View:
(Denotes required field.)