Home  >  INTRUSION  >  KEYPADS(NO RF),CTRL. MODULES  > Ethernet Port Interface

Ethernet Port Interface

Item #:M1XEP 
You must be logged in to order this item.
Log in here
Elk Products M1XEP

The ELK-M1XEP is an Ethernet Appliance with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments. It is powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.
Includes:

  • M1 Ethernet Interface
  • Plastic Housing
  • 4 #6 Plastic Anchors
  • 4 #6 Pan Head Sheet Metal Screws
  • ELK-P1216 1.6A, 12Vdc Power Supply
  • ELK-W040A DB9 Pin Serial Cable Assembly
  • Instructions
Features:
  • Secure connection with password protection and SSL/TLS encryption
  • Flash Memory for Firmware Updating
  • Event notification via E-Mail (SMTP)
  • Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
  • Supports Network Time Protocol for synchronizing the M1/EZ8's clock with an Internet time server.
  • Internet Monitoring and Reporting Capability
  • Network stack supporting the following protocols:
    • TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
  • Federal Information Processing Standards (FIPS) 128 bit encryption
  • Integrated 802.3 compliant 10/100 Mbit network interface
  • RS232, DB9M 9-pin serial port connection
  • Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
  • RJ45 8-pin Network Jack
  • 2.1mm barrel type power connector (center positive)
  • LED Indicators for Power, Link, and Data
Specifications:
  • Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **
  • Current Draw: approx. 300 mA
  • Housing Dimensions: 4.25 in. x 6.375 in. x 2.125 in.
  • Circuit Board Dimensions: 2.25 in. x 3.95 in.
  • ELK-W040A Serial Ribbon Cable included

New Catalog

Brand
ELK PRODUCTS INC
Elk Products M1XEP
Ethernet Port Interface
Quantity:
(Denotes required field.)