Home  >  INTRUSION  >  WIRELESS TRANSMITTERS/DEVICES  > ADT Branded AT&T LTE Universal Cellular Alarm Communicator with Transformer

ADT Branded AT&T LTE Universal Cellular Alarm Communicator with Transformer and Battery

Item #:LE4000RF-ADTAT 
You must be logged in to order this item.
Log in here
LE4000RF-ADTAT
  • Uses LTE cellular network for high-speed, reliable and low-cost communications to an IP receiver Automatically switches to 3G (HSPA/ HSPA+) if LTE service is not available
  • Compatible with control panels that communicate using the Contact ID and SIA (300 baud) formats
  • Full event reporting
  • 2 on-board inputs
  • 2 on-board outputs (open collector)
  • Activation and initialization via website or mobile interface provided by C24 Communications
  • View communicator status directly from your mobile phone to support on-site or remote troubleshooting
  • PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
  • SMS command & control for panel arm/disarm
  • PTM call routing to direct cellular signals to multiple receivers based on dialed number
  • Advanced carrier selection to secure a suitable cellular connection
  • Two unique trouble display models
  • Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
  • Mobile Site for Easy Installation and Comprehensive Maintenance
  • Advanced Panel Transmission Monitoring
  • SMS Command & Control
  • Input Voltage 13.8 Vdc
  • Current Draw (without battery) 40 mA (standby) 180 mA (transmitting)
  • The LE4000 has been listed by UL/ULC for Residential Fire and Burglary and UL/ULC Commercial Burglary installations.
  • Dimensions 8.5" H x 4.9" W x 1.3" D (216mm x 124mm x 33mm)

New Catalog

Brand
DSC / TYCO SAFETY PRODUCTS
LE4000RF-ADTAT
ADT Branded AT&T LTE Universal Cellular Alarm Communicator with Transformer and Battery
Quantity:
(Denotes required field.)