10 Input Zones Annunciator Module

The ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP). The ANNLED module provides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input zones or addressable points. ANN-RLED has red LEDs only for alarm communication of up to 30 addressable points.

The ANN-LED is supplied standard with certain Canadian FACPs as required by ULC.

The ANN-LED and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. An additional two wires are used for 24-volt DC power. A single four-conductor unshielded cable may be used for both power and data communications.

Up to eight ANN-BUS devices may be connected to the ANNBUS of each FACP.

Features

• ANN-LED connects to the ANN-BUS terminal on the FACP and requires minimal programming.
• Includes three LEDs for each zone: Alarm, Trouble and Supervisory.
• Compatible with the MS-9050UD, MS-5UD-3, MS-10UD-7, MRP-2001, MRP-2002, MS9200UDLS version 4.0 or greater, MS-9600LS and MS-9600UDLS.
• Can be remotely located up to 6,000 feet (1,829 m) from the panel.
• May be powered by 24 VDC from the host FACP or byremote power supply (requires 24 VDC)