|◀ ◀ 1 - 12 of 431 ▶ ▶|
View:

PowerSeries Pro 2Amp Power Supply with Bus Repeater, HS65WPS NA Power Adaptor

  • The HSM3204CX provides an additional 12 VDC, 2 amps of current along with 4 programmable Form C relay outputs
  • Each module extends the bus up to 4000 feet. Four modules may be connected together in series for a total of 14,000 feet
  • Uses HS65WPSNA Power Supply adapter
  • Connect up to 1/8 modules per system
  • Provides enhanced diagnostics information for simpler diagnostics
Item#:
HSM3204CX NA
You must be logged in to order this item. Log in here

POWER CORD 3 CONDUCTOR 3 FEET

Item#:
AK500/14-OE-5-1
You must be logged in to order this item. Log in here

PowerSeries Pro 3Amp Power Supply with HS65WPSNA Power Adaptor

  • The HSM3350 provides an additional 12 VDC, 3 amps of power
  • Dual battery backups individually supervised
  • Uses HS65WPSNA Power Supply adapter
  • Connect up to 3/4 modules per system
  • Provides enhanced diagnostics information for simpler diagnostics
Item#:
HSM3350 NA
You must be logged in to order this item. Log in here

AL400UL UL PS W/LARGE GRY CABT 4 amp or 24VDC @ 3 amp, AC &

Input

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision
  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts).
Visual Indicators
  • AC input, DC outputand Battery LED indicators.
Item#:
AL400ULX
You must be logged in to order this item. Log in here

Power Supply Charger, Single Class 2 Output, 12/24VDC @ 4A, 115VAC, Board

Altronix AL400ULXB2 UL Listed Sub-Assembly power supply/charger converts a 115VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.
This product replace AL4000ULXB

Specifications:
Input:

  • Input 115VAC, 60Hz, 3A.
  • Input fuse rated @ 3.5A/250V.
Output:
  • 12VDC or 24VDC selectable output.
  • 12VDC @ 4A or 24VDC @ 3A supply current.
  • Class 2 Rated power limited output.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
Supervision:
  • AC fail supervision (form C contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form C contacts).
  • Battery presence supervision (form C contacts).
Visual Indicators:
  • AC input, DC outputand Battery LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
    • BTU/Hr (approx.):
      • 12VDC: 25 BTU/Hr.
      • 24VDC: 37 BTU/Hr.
  • System AC input VA requirement: 402.5VA.

Item#:
AL400ULXB2
You must be logged in to order this item. Log in here

Mounting Magnets 24 Pack; incl 24) Quantity per Pack

Item#:
MM24
You must be logged in to order this item. Log in here

Linear Power Supply Charger, Single Class 2 Output, 6/12/24VDC @ 1.2A

Altronix AL624 power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC output. This general purpose power supply has a wide range of applications for access control, security, and CCTV system accessories that require additional power.

Specifications:

  • Switch selectable 6VDC-12VDC-24VDC.
  • 6VDC or 12VDC @ 1.2 amp supply current or 24VDC @ .75 amp supply current.
  • Input 16VAC to 24VAC, 20VA to 40VA.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current 300mA.
  • Automatic switchover to stand-by battery when AC fails (zero voltage drop).
  • PTC battery protection.
  • AC input and DC output LEDs.
  • Extremely compact design.
  • Includes battery leads.

Item#:
AL624
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Specifications:
Input:

  • 16VDC from TP1640 plug-in transformer.
Output:
  • 6VDC or 12VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 276VA.

Item#:
SMP3ET
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 4A, 24/28VAC, Board

SMP5 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Trac compatible (order Altronix model number ST3).

Specifications:
Input:
  • 6VDC applications use TP1640.
  • 12VDC applications use T2428100.
  • 24VDC applications use T2428175.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 4A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 13 BTU/Hr.
    • 12VDC: 25 BTU/Hr.
    • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC: 55.2VA.
    • 12VDC/24VDC: 115VA.

Item#:
SMP5
You must be logged in to order this item. Log in here

6 , 12 , or 24 Volt DC Power Supply & Battery Charger

The ELK-P624 is a general-purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic resetting "fuseless" overload protection means never having to return to a job site to replace a blown fuse. 
On-board diagnostic LEDs indicate the presence of the AC charging and DC output voltages. The output voltage can be set with a mini-jumper.
  • Selectable 6, 12, or 24 Volts DC Operation
  • Automatic Resetting "fuseless" Overload Protection (PTC)
  • Visual AC and DC Power Indicators
  • Built-In Battery Charge Circuit
  • Small, Compact Size
  • Includes Double Sided Mounting Tape
  • AC and DC Surge Suppression
  • 6VDC Setting:
    • Current Rating: 1.2A
    • with 12V, 40VA Transformer
  • 12VDC Setting:
    • Current Rating: 1.0A
    • with 16.5V, 45VA Transformer
  • 24VDC Setting:
    • Current Rating: 800mA
    • with 24V, 40VA Transformer
  • Standby Battery Capacity: 1.2 to 10 AH
  • Size: 3" X 3" (76.2mm X 76.2mm)
Item#:
P624
You must be logged in to order this item. Log in here

Relay Module, 12/24VDC, DPDT Contacts @ 1A - 120VAC or 2A - 28VDC

RBSN relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

  • 12VDC or 24VDC operation.
  • Current draw: 15mA.
Contact Rating
  • 1A/120VAC or 2A/28VDC DPDT contacts.
Temperature
  • Operating -25ºC to 55ºC ( -13ºF to 131ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.
  • System AC input VA requirement:
  • 12VDC: 1.8VA.
  • 24VDC: 3.6VA.

Item#:
RBSN
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 12/24VDC @ 4A, 115VAC, Supervision

SMP5PMCTX supervised power supply/charger converts a 115VAC/230VAC, 50/60Hz input into a regulated 12VDC or 24VDC output @ 4A continuous supply current.

Specifications:
Input:

  • Input 115VAC, 50/60Hz, 0.95A or 230VAC, 50/60Hz, 0.5A.
Output:
  • 12VDC or 24VDC selectable output.
  • 4A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Supervision:
  • AC fail supervision (form C contacts).
    • Low battery supervision (form C contacts).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 12VDC: 25 BTU/Hr.
    • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 115VAC: 109.25VA.
    • 230VAC: 115VA

Item#:
SMP5PMCTX
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 431 ▶ ▶|
View:
(Denotes required field.)